How to create Logs

How to create Logs

Here's a quick guide of how to create logs:

      1.    Go to %DOCUMENTS%\Camera Ballistics on the PC you have this issue on
      2.    Open the „Settings.ini“ file in notepad
             There should be [drvman] and [Settings] sections in there, kindly rewrite these parameters as per below

                [drvman]
                  MaxLogSize=20000000
                  EnableLogging=1
                  LogLevel=5

                [Settings]
                  PortLogLevel=5

      3.    Save file and restart Camera Ballistics
      4.    Reproduce the issue exactly like how it happened
      5.    Close Camera Ballistics
      6.    ZIP the Logs folder, which is in %DOCUMENTS%\Camera Ballistics and send it to us
      7.    Delete this Logs folder after you send it to us, to clean up your PC
      8.    Rewrite all previous values in the Setting.ini to 0 
      (having them at higher numbers will cause Camera Ballistics to keep logging and take a lot of space from your disk)
    • Related Articles

    • How to create logs

      Here's a quick guide of how to create logs:       1.    Go to %DOCUMENTS%\Phone Copier Express on the PC you have this issue on       2.    Open the „Settings.ini“ file in notepad              There should be [drvman] and [Settings] sections in ...
    • How to create communication logs

      1. Open My Documents\Mobiledit! folder, if there is folder named Logs, delete it. 2. Run the MOBILedit software! 3. Enable logging:     3a. Open File/Settings... in the program menu.     3b. Open the Communication tab     3c. Check the Logging ...
    • How to extract messages and other files if they are not already in an export

      You might have found out that some applications do not provide their information that you need (e.g. messages, call logs) by themselves it is due to information being encrypted by developer/manufacturer.   There are a few ways how to extract your ...
    • Types of logs

      Extraction logs Main log of the extraction process is located in export folder, filename is “log_full.txt”. It contains information about extracted files and everything else you can see on the screen during extraction process and during the report ...
    • Send us logs

      We hope to resolve the problem you have encountered as soon as possible, but the solution for this problem cannot be determined without some very important information that we will need your help to acquire. This important information is stored in ...