Ports

Ports

This tab allows you to manage the connection ports manually. Every mobile device connected and properly recognized by the computer will have its port type displayed here.

 You have three options for connecting a device :

 


A device can be connected only when its port is selected. If you want to disconnect a device / prevent a device from connecting, you can uncheck it here.


We strongly recommend the use of the Connection Wizard to establish the connection.

ports


Advanced Bluetooth settings allows you to select the type of BlueTooth stack. We recommend not to adjust these settings unless you have been instructed by technical support to do so.
MOBILedit supports:
  • Microsoft Windows native BlueTooth driver (strongly recommended)
  • IVT (BlueSoleil) BlueTooth stack
  • WIDCOMM BlueTooth Driver

    • Related Articles

    • Excluding devices

      Sometimes it is necessary to exclude devices connected to a PC, for example if you run a kiosk and have other serial devices connected. Without this, Phone Copier will be trying to establish a communication with these devices and whole solution will ...

    • Minimum system requirements

      To enjoy the best possible user experience, we recommend the minimum system requirements to be as follows: CPU: Intel Atom, recommended is Core i3 or better RAM: 2 GB as minimal configuration, 4 GB is recommended Disk: 0.5 GB for Phone Copier itself, ...

    • Data sources

      It is very important to understand the difference between types of data sources within the MOBILedit Framework. Tree View or Navigation distinguishes the sources of data into these types: Connected (online) devices Internet Storage Offline devices ...

    • Issues while connecting phone?

      If you are unable to connect your phone to MOBILedit, you should check these hints. These are often the key to connect your device: Make sure your phone is supported Check the list of supported phones. Make sure to only use connection types that are ...