With our SIM reader, only normal (standard sized) SIM cards are supplied.
Also it is only possible to insert standard sized SIM cards into our reader.
In order for this standard sized SIM to fit into phones with micro or nano SIM card slots, please use a SIM cutting machine on the supplied SIM card after the copying/cloning is done.
It is also possible to copy data from or to a smaller SIM, because there are many frames/adapters for SIM cards out there, which can very easily "change" the size of a SIM card to the desired one.
It is safe to use a smaller SIM card inside an adapter in our SIM reader.
The picture above shows a default types of the described tools in this article.
1. SIM card cutting machine
2. nano to micro adapter
3. nano to standard adapter
4. micro to standard adapter
5. SIM card chamber opener
Data - SIM card
Extracts data from the SIM card such as IMSI, Country, ICCID, and Operator as shown below:
How to access SIM card without PIN
In order to get access to data stored in SIM, such as contacts or messages, you need to know PIN. If you don't have PIN, you can unlock the SIM with PUK. The security mechanism of SIM doesn't allow to get data from it without autorizing to the card, ...
It is possible to copy SIM card data, however, the SIM features (phonebook, SMS) have to be supported by both the source and the destination device. If you intend to use Data Transer to migrate from one phone to another, it is not necessary to copy ...
Although most of the modern mobile devices use internal memory to store contacts and messages, some data may be also stored on SIM cards. Some phones allow us to preview and edit it; however, full information can usually be accessible only through a ...
How to use the SIM Cloning tool
Keep in mind that the cloned SIM card will NOT connect to the network! The special MOBILedit rewritable SIM card and original SIM card are required. 1) Connect MOBILedit's SIM card reader and insert the SIM card you wish to copy. (If you don't know ...